Cebora thread drag unit with 4 rollers Ø 30 mm made of aluminum

With generator transport trolley, earth cable and clamp (3 m - 35 mm2)

Prepared for cooling equipment

More than 30 synergic curves for solid wire Ø 0.6 / 0.8 / 0.9 / 1.0 / 1.2 mm

Includes Double current level (MIG Short process), Pulsed and Double pulsed function

SRS (Spatter Reduction System) welding process included, which allows to obtain welds without spatter with little heat input

System calibration process to adjust all welding parameters and process variables (from the characteristics of the welding torch to the connection extension used between the carriage and the generator);

Pulsed TIG upgrade

Includes dust filter to protect the machine from iron dust

The generator has several adjustable functions from the LCD touch screen, such as:
- arc length, 2 times / 4 times, spotting time, pause time, impedance, burn back, approach, soft start, postgas, pregas, etc.
- selection of SHORT or PULSED process
- three important specific functions for optimal aluminum welding (3 levels, automatic Hot start, automatic Crater filler)

Equipped with a digital ammeter / voltmeter with a degree of precision of 1% and thermal protection devices

Firmware update via USB interface

Second gas connection and additional solenoid valve specific for the TIG process

“Euro” type MIG / MAG torch connector + Specific connector for TIG torch

It is possible to work with two different types of spools: Ø 200 mm and Ø 300 mm