REF: 571305

COMPACT SINGLE-PHASE INVERTER GENERATOR FOR MIG/MAG WELDING 

  230V 50/60 Hz  +15%/ -20%

Technical characteristics:

• 2-roller wire feeder unit Ø 30 mm
• With ground cable and clamp (3 m - 16 mm²)
• 37 synergistic curves included for Iron Ø 0.6 / 0.8 / 0.9 / 1.0 mm;  A. Stainless steel 0.8 / 0.9 mm; Aluminum 0.9/1.0mm; CuSi3% 0.8 / 0.9 mm and for tubular wire Ø 0.9mm. The tubular wires can be welded, with or without gas protection, by simple polarity inversion
• The LCD panel allows the type of wire and gas, current and thickness, tension and speed of the wire to be displayed in synergistic mode
• The generator has numerous adjustable functions accessible from the panel, such as: 
  - arc length, 2 strokes/4 strokes, spot time, pause time, impedance, wire reheat , approach, etc.
  -  process selection SHORT or PULSED - three important specific functions for optimal aluminum welding (3 levels, Hot start automatic, Crater filler automatic)
• The generator can also be powered by motor generators of adequate power (min. 6 KVA)