PLASMA 36 COMPRESSOR PFC INVERTER - ELETTRO P00481
REF: 195P00481
Description:
Single-phase inverter generator for power cutting metals by compressed air plasma PLASMA 36 COMPRESSOR is Equipped with an integrated air compressor (with maintenance-free self-lubricating piston) that ensures the operator total work autonomy and ease of use since it does not require air adjustments. It is characterized by reduced dimensions and weight, low absorbed power, ease of use, reliability, high capacities and cutting speed, especially suitable for maintenance and the automotive sector.
The minimum cutting current of 5A allows cutting overlapping sheets of small thickness, a function particularly used in the bodywork sector. Equipped with arc ignition without HF, it allows working in the vicinity of computers or other equipment sensitive to emissions. high frequency. It is It is equipped with a PFC (power factor correction) device that reduces and stabilizes the absorbed power.
It can be connected to motor generators of adequate power. The P25 torch is Equipped with Low Pilot Arc technology that protects the proper functioning of consumables, extending their life.
MAIN CHARACTERISTICS
• Max. cutting thickness on steel: 12 mm
• Max. separation thickness on steel: 16 mm
• Pilot arc for working on varnished or coated metals.
• Function: “Post-gas”
• Electronic regulation of the cutting current
• Safety systems in the torch
• Control of cutting parameters and functions by microprocessor.
• Thermostatic protection
• They include the 4 meter P25 manual torch and the ground cable.
TECHNICAL DATA:
| Code | P00481 | |||
| Item | PLASMA 36 COMPRESSOR PFC INVERTER | |||
| Input Voltage | 1x230V 50-60HZ | |||
| Absorbed power | 20% 3.6 kVA - 60% 2.1 kVA - 100% 1.9 kVA | |||
| Cutting current | 5 ÷ 30 A | |||
| Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1 | 20% 30 A - 60% 18 A - 100% 15 A | |||
| Air pressure | - | |||
| Air flow | - | |||
| Cut thickness on steel | 12 mm | |||
| Max separation cut | 16 mm | |||
| Piercing | 4 mm | |||
| Protection class | IP 23 | |||
| Construction standards | EN60974 – 1 / EN60974 – 7 / EN60974 – 10 | |||
| Dimensions | 210x350x460 h mm | |||
