Roscamat 500 pneumatic tapping machine
REF:
Work area greater than that of Roscamat 400 thanks to its longer arms.
A radial arm with brake at the base and two tilting arms.
The compressed air motor is mounted at the end of the last rocker arm.
The machine can be fixed to the workbench or table through three M8 screws or with a flange.
Work area: Radius 2120 mm. Height: 1110 mm.
Ask for quotation
Any questions? Contact us
Información adicional
The radial arm and the rocker arm rotate on themselves.
The last swing arm always maintains perpendicularity to the reference plane.
The machine incorporates the air group (filter + regulator + lubricator) for the correct operation of the engine.
The modular system consists of seven quick-change modules (reducers) that adapt to the motor.
As a result of these seven different output speeds (90, 170, 300, 550, 750, 1050 and 2100 rpm) it is possible to adapt to each type of thread.
The handle allows the swing arm to be balanced in the position that best suits the operator.
Depending on the work to be carried out (blind or through holes) the modular system allows the use of quick-change tap holders with or without a safety clutch.
The capacity is from M2 to M24 (M27).
